How to upgrade the firmware:
1. To execute the firmware updating, please press the TAP/BPM button + 2nd button of crossfader effect (please refer to the drawing attached above), then power up.
2. Connect the USB cable to your PC.
3. Run the IQ2_FirmwareUpdate.jar program.
Important: The “IQ2_FirmwareUpdate.jar” and “sys.ini” program should be in same folder, the “IQ2_FirmwareUpdate.jar” is a java program, please ensure your PC has installed with “Sun Microsystems Java Runtime Environment (JRE) ” before run the update program.
4. You can see the “Select MIDI Device” screen, please select “Reloop IQ2” then “Open File” (IQ2Midi_v1.08.bin that attached with the email).
5. Click “Start” to update the firmware.
6. To check the firmware version after upgrading, you may press the TAP/BPM button + 1st button of crossfader effect then power up to check the firmware version, to exit the firmware version check mode, you may press the FX/ON button + 3rd button of crossfader effect to exit.
